#= dcpam_main プログラム用 NAMELIST ファイル (T21L26 用)
#
#= NAMELIST file for "dcpam_main"
#
# Copyright (C) GFD Dennou Club, 2008-2009. All rights reserved.
#
# Note that Japanese and English are described in parallel.
#

&set_solarconst_nml
  SolarConst = 1150.0d0
/

&surface_properties_lo_nml
  AlbedoLand = 0.2d0
/
&modify_albedo_snowseaice_nml
  FlagModAlbedoBasedOnTemp = .true.
/

&lscond_nml
  QH2OFlucRatio = 0.1
/
&mass_fixer_nml
  ThresholdForMessage = -1.0d-20
/
&sltt_nml
  FlagSLTTArcsineHor = .false.,
  FlagSLTTArcsineVer = .false.
/
&sltt_const_nml
  dtiw = 2,
  dtjw = 3
/
!&cloud_utils_nml
!  CCNMixRatPerUnitMass = 1.0d9
!/
&constants_snowseaice_nml
  TempBelowSeaIce = 263.15d0,
  SnowAlbedo   = 0.6d0,
  SeaIceAlbedo = 0.6d0,
  SnowThresholdForFlux   =  10.0d0,
  SnowThresholdForAlbedo =  10.0d0,
!  ThresholdSurfSnow =  20.0d0,
!  ThresholdSurfSnow =  50.0d0,
!  ThresholdSurfSnow = 100.0d0,
!  SnowMaxThermDepth = 1.0d0
/
&gwd_m1987_nml
!  FlagDetermineRefLevByStd = .true.,
!  SigmaRef = 0.985d0,
  SigmaRef = 0.970d0,
!  SigmaRef = 0.910d0,
!      & CrtlFNumSq, &
!      & Efficiency, &
  OrogEffWaveLength =  100.0d3
/
&saturate_nml
  SaturateWatIceFracType = 'Lin'
!  SaturateWatIceFracType = 'Quad',
!  TempIceLim = 233.15d0,
!  TempWatLim = 273.15d0
  TempIceLim = 253.15d0,
  TempWatLim = 273.15d0
!  TempIceLim =   0.0d0,
!  TempWatLim =   0.0d0
/
&dry_conv_adjust_nml
  FlagAdjustMom = .true.,
  FlagAdjustMR  = .true.
/
&check_prog_vars_nml
  TempMax = 320.0d0
/
&dcpam_main_nml
    DynMode                 = 'HSPLVAS83',
!!$    DynMode                 = 'NoHorAdv',
    PhysMode                = 'FullPhysics',
!!$    PhysMode                = 'HS94',
!!$    PhysMode                = 'VenusSimple',
!!$    PhysMode                = 'JupiterSimple',
!!$    PhysMode                = 'NoPhysics',
!!$    RadModel                = 'DennouAGCM',
    RadModel                = 'Earth',
!!$    RadModel                = 'Mars',
!!$    RadModel                = 'SL09',
!!$    RadModel                = 'Simple',
    SfcFluxMethod           = 'BH91B94',
    VDiffMethod             = 'MY2.5',
!    PhysImpMode             = 'SoilModel',
    PhysImpMode             = 'SoilModelSO',
!!$    PhysImpMode             = '1LayModel',
!!$    PhysImpMode             = 'AtmOnly',
!!$    MCMethod                = 'None',
!!$    MCMethod                = 'MCA',
!    MCMethod                = 'RAS',
    MCMethod                = 'RASWithIce',
!    LSCMethod               = 'None',
!    LSCMethod               = 'M65',
!    LSCMethod               = 'M65WithIce',
!    LSCMethod               = 'LL91',
    LSCMethod               = 'LL91WithIce',
!!$    CloudMethod             = 'None',
!    CloudMethod             = 'Simple',
    CloudMethod             = 'SimpleWithIce',
!    CloudMethod             = 'T1993WithIce',
!!$    SfcMoistMethod          = 'None',
    SfcMoistMethod          = 'Bucket',
    GWDMethod               = 'None',
!!$    GWDMethod               = 'M1987',
!!$    DCMethod                = 'None',
    DCMethod                = 'DCA',
    FlagSnow                = .true.
/
&fileset_nml
  FileTitle = 'Simulation of an atmosphere of planet with the land and the ocean', 
                              ! 出力データファイルの表題.
                              ! Title of output data files
  FileSource = 'dcpam5 $Name:  $ (http://www.gfd-dennou.org/library/dcpam)', 
                              ! データファイル作成の手段. 
                              ! Source of data file
  FileInstitution = 'GFD Dennou Club (http://www.gfd-dennou.org)'
                              ! データファイルを最終的に変更した組織/個人. 
                              ! Institution or person that changes data files for the last time
/
&gridset_nml
  nmax   =  21,                 ! 最大全波数. 
                                ! Maximum truncated wavenumber
  imax   =  64,                 ! 経度格子点数. 
                                ! Number of grid points in longitude
  jmax   =  32,                 ! 緯度格子点数. 
                                ! Number of grid points in latitude
  kmax   =  26,                 ! 鉛直層数. 
                                ! Number of vertical level
  kslmax =   9                  ! 地下の鉛直層数. 
                                ! Number of subsurface vertical level
/
&composition_nml
  ncmax       = 4,
  Names       = 'QH2OVap', 'QH2OLiq', 'QH2OSol', 'TKE',
  FlagAdv     = .true., .true.,   .true.,   .true.,
  FlagMassFix = .true., .true.,   .true.,   .false.,
  FlagVDiff   = .true., .true.,   .true.,   .false.,
!  ncmax       = 5,
!  Names       = 'QVap', 'H2OLiq', 'H2OSol', 'TKE',   'CloudCover', 
!  FlagAdv     = .true., .true.,   .true.,   .true.,  .true.,
!  FlagMassFix = .true., .true.,   .true.,   .false., .false.,
!  FlagVDiff   = .true., .true.,   .true.,   .false., .false.,
!  ncmax       = 4,
!  Names       = 'QVap' 'H2OLiq' 'H2OSol', 'TKE',
!  FlagAdv     = .true., .true., .true., .true.,
!  FlagMassFix = .true., .true., .true., .false.
!  ncmax       = 3, 
!  Names       = 'QVap' 'H2OLiq' 'TKE',
!  FlagAdv     = .true., .true., .true.,
!  FlagMassFix = .true., .true., .false.
/
!&composition_nml
!  ncmax       = 2, 
!  Names       = 'QVap' 'H2OLiq',
!!  FlagAdv     = .true., .false.
!  FlagAdv     = .true., .true.
!/
&timeset_nml
  cal_type          = 'noleap',
  InitialYear       =     1,
  InitialMonth      =     1,
  InitialDay        =     1,
  InitialHour       =     0,
  InitialMin        =     0,
  InitialSec        =     0.0d0,
!  EndYear           =     4,
  EndYear           =    21,
  EndMonth          =     1,
  EndDay            =     1,
  EndHour           =     0,
  EndMin            =     0,
  EndSec            =     0.0d0,
  DelTimeValue    = 32.0, 
!  DelTimeValue    = 30.0, 
!  DelTimeValue    = 24.0, 
!  DelTimeValue    = 20.0, 
!  DelTimeValue    = 15.0, 
!  DelTimeValue    = 12.0, ! failed(?)
!  DelTimeValue    = 10.0, ! T42
                              ! $ \Delta t $ .  単位は DelTimeUnit にて指定.
                              ! Unit is specified by "DelTimeUnit". 
  DelTimeUnit     = 'min', 
                              ! $ \Delta t $ の単位. 
                              ! Unit of $ \Delta t $ 
  PredictIntValue = 1.0, 
                              ! 終了予測日時表示間隔. 
                              ! Interval of predicted end time output
  PredictIntUnit  = 'day', 
                              ! 終了予測日時表示間隔 (単位). 
                              ! Unit for interval of predicted end time output
  CpuTimeMoniter  = .true.
                              ! CPU 時間計測のオンオフ
                              ! On/off of CPU time monitoring
/
&restart_surftemp_io_nml
  InputFile = 'surface_T21.nc'
/
&restart_file_io_nml
  InputFile = 'init_T21L26.nc', 
                              ! 入力する初期値/リスタートデータのファイル名
                              ! filename of input initial/restart data
  OutputFile = 'rst.nc', 
                              ! 出力するリスタートデータのファイル名
                              ! filename of output restart data
  IntValue = 365.0, 
!  IntValue =  30.0, 
                              ! リスタートデータの出力間隔. 
                              ! Interval of restart data output
  IntUnit = 'day' 
                              ! リスタートデータの出力間隔の単位. 
                              ! Unit for interval of restart data output
/
&relaxed_arakawa_schubert
  RASSupressFactor      =  0.1d0,
!  DetCldWatCondFactor0  = -1.0d0,
!  DetCldIceCondFactor0  = -1.0d0,
!  PRCPArea             = 0.0d0,
!  PRCPEvapArea         = 0.0d0,
!  RainSnowConvFactor0      = 0.0d0,
  PRCPArea             = 0.05d0,
!  PRCPEvapArea         = 0.05d0,
!  RainSnowConvFactor0  = 0.500d0,
!  RainSnowConvFactor0  = 0.700d0,
  RainSnowConvFactor0  = 0.900d0,
!  AdjTimeConst         = 1800.0d0,
  FlagZeroCrtlCWF      = .true.
!  FlagZeroCrtlCWF      = .false.
/
&cloud_simple_nml
!  CloudCoverMethod = 'RHLin',
!  CloudCoverRHCrtl = 0.8d0,
  CloudCoverMethod = 'Const',
!  FlagPRCPEvap        = .true.,
  PRCPArea            = 1.0d0,
  PRCPEvapArea        = 1.0d0,
!  PRCPEvapArea        = 0.5d0,
!  PRCPEvapArea        = 0.1d0,
!  PRCPEvapArea        = 0.0d0,
!  SnowMethod = 'KeyLLTemp',
  SnowMethod = 'StepPC',
  CloudWatLifeTime  =  3240.0d0,
  CloudIceLifeTime  =  8400.0d0,
/
&surface_properties_nml
  SurfTempSetting    = 'generate_internally', 
                              ! 地表面温度の設定方法
                              ! Setting of surface temperature
  SurfTempFile       = '',
                              ! 地表面温度のファイル名. 
                              ! File name of surface temperature
  SurfTempName       = '',
                              ! 地表面温度の変数名. 
                              ! Variable name of surface temperature
  SeaIceSetting      = 'generate_internally', 
                              ! 海氷面密度の設定方法
                              ! Setting of sea ice
  SeaIceFile         = '',
                              ! 海氷面密度のファイル名. 
                              ! File name of sea ice
  SeaIceName         = '',
                              ! 海氷面密度の変数名. 
                              ! Variable name of sea ice

  SurfTypeSetting    = 'generate_internally',
  SurfTypeFile       = '',
  SurfTypeName       = '',
  SurfCondSetting    = 'generate_internally',
                              ! 地表状態の設定方法
                              ! Setting of surface condition
  SurfCondFile       = '',
                              ! 地表状態 (0: 固定, 1: 可変) のファイル名.
                              ! File name of surface condition (0: fixed, 1: variable)
  SurfCondName       = '',
                              ! 地表状態 (0: 固定, 1: 可変) の変数名.
                              ! Variable name of surface condition (0: fixed, 1: variable)
  SurfCulIntSetting  = 'generate_internally',
                              ! 
                              ! Setting of surface cultivation intensity
  SurfCulIntFile     = '',
                              ! 
                              ! File name of surface cultivation intensity
  SurfCulIntName     = '',
                              ! 
                              ! Variable name of surface cultivation intensity
  SurfHeightSetting  = 'generate_internally', 
                              ! 地表面高度の設定方法
                              ! Setting of surface height
  SurfHeightFile     = '',
                              ! 地表面高度のファイル名.
                              ! File name of surface height
  SurfHeightName     = '',
                              ! 地表面高度の変数名.
                              ! Variable name of surface height
  SurfHeightStdSetting  = 'generate_internally',
                              ! 地表面高度標準偏差の設定方法
                              ! Setting of surface height standard deviation
  SurfHeightStdFile     = '',
                              ! 地表面高度標準偏差のファイル名.
                              ! File name of surface height standard deviation
  SurfHeightStdName     = '',
                              ! 地表面高度標準偏差の変数名.
                              ! Variable name of surface height standard deviation
  AlbedoSetting      = 'generate_internally', 
                              ! アルベドの設定方法
                              ! Setting of surface albedo
  RoughLengthSetting = 'generate_internally'
                              ! 粗度長の設定方法
                              ! Setting of surface roughness length
/
&surface_data_nml
  SurfType         = 0,
  Albedo           = 0.1d0,
  RoughLength      = 0.1d-3,
  HeatCapacity     = 0.0d0,
                              ! 地表熱容量.
                              ! Surface heat capacity
  SurfCond         = 1
                              ! 地表状態 (0: 固定, 1: 可変).
                              ! Surface condition (0: fixed, 1: variable)
/
&rad_short_income_nml
  FlagAnnualMean       = .false.,
  FlagDiurnalMean      = .false.,
  EpsOrb               =   23.44d0,
  PerLonFromVE         =  282.768413d0,
  LonFromVEAtEpoch     =  279.403308d0,
  Eccentricity         =    0.016713d0,
  TimeAtEpoch          =   -1.0d0,
  EpochYear            = 1990,
  EpochMonth           =    1,
  EpochDay             =    1,
  EpochHour            =    0,
  EpochMin             =    0,
  EpochSec             =    0.0d0
/
&set_O3_nml
 FlagO3 = .false.,
 O3File = "../data_Earth/O3_CMIP5_climatology_zonalmean_T021_P8.nc"
/
&axesset_nml
  Depth = 0.0d0, -4.0d-2, -12.0d-2, -28.0d-2, -40.0d-2, -64.0d-2, -112.0d-2, -208.0d-2, -400.0d-2, -784.0d-2,
  Sigma =  1.00000000 0.997503102 0.992528021 0.982652187 0.963194370 0.927743435 0.893597305 0.829029083 0.762362421 0.695695758 0.629029095 0.562362432 0.495695770 0.429029107 0.362362444 0.295695782 0.230288103 0.179348558 0.139676794 0.108780399 8.47182572E-02 6.59786463E-02 5.13842218E-02 4.00180705E-02 3.11661046E-02 1.55830523E-02 0.00000000E+00
                              ! $ \sigma $ レベル (半整数). 
                              ! Half $ \sigma $ level
/
&dynamics_hspl_vas83_nml
  FlagSLTT        = .true.,
!  FlagSLTT        = .false.,
!  TracerTransportMethod       = "semi-lagrange"
  FlagSpongeLayer = .true.,
  SLEFoldTimeValue = 10.0d0,
  SLEFoldTimeUnit  = 'day',
  SLOrder          = 1,
  SLNumLayer       = 5,
  FlagDivDamp = .true.,
!  HDOrder = 4,
  HDOrder = 8,
                              ! 超粘性の次数.  Order of hyper-viscosity
  HDEFoldTimeValue = 1.0, 
                              ! 最大波数に対する e-folding time. 
                              ! 負の値を与えると, 水平拡散係数をゼロにします. 
                              ! 
                              ! E-folding time for maximum wavenumber. 
                              ! If negative value is given, 
                              ! coefficients of horizontal diffusion become zero.
  HDEFoldTimeUnit = 'day'
                              ! 最大波数に対する e-folding time の単位. 
                              ! Unit of e-folding time for maximum wavenumber
/
!
! ヒストリデータ出力の全体設定
! Global settings about history data output
!
&gtool_historyauto_nml
  IntValue = 0.25,
                              ! ヒストリデータの出力間隔の数値. 
                              ! 負の値を与えると, 出力を抑止します. 
                              !
                              ! Numerical value for interval of history data output
                              ! Negative values suppresses output.
  IntUnit = 'day',
!!$  IntUnit = 'hrs',
!!$  IntUnit = 'min',
!!$  IntUnit = 'sec',
                              ! ヒストリデータの出力間隔の単位. 
                              ! Unit for interval of history data output
  Precision = 'float',
!!$  Precision = 'double',
                              ! ヒストリデータの精度. 
                              ! Precision of history data
  FilePrefix = '',
!!$  FilePrefix = 'data01/',
                              ! ヒストリデータのファイル名の接頭詞. 
                              ! Prefixes of history data filenames
/
!
! ヒストリデータ出力の個別設定
! Individual settings about history data output
!
&gtool_historyauto_nml
  Name = 'U, V, Temp, Ps, QH2OVap',
/
&gtool_historyauto_nml
  Name = 'QH2OLiq, QH2OSol'
/
!&gtool_historyauto_nml
!  Name = 'Vor, Div, SigDot, DPiDt'
!/
&gtool_historyauto_nml
  Name = 'SigDot'
/
&gtool_historyauto_nml
  Name = 'SurfTemp'
/
&gtool_historyauto_nml
  Name = 'SoilMoist'
/
&gtool_historyauto_nml
  Name = 'SurfSnow'
/
&gtool_historyauto_nml
  Name = 'SoilTemp'
/
&gtool_historyauto_nml
  Name = 'Rain, Snow, PRCP',
  TimeAverage = .true.
/
!&gtool_historyauto_nml
!  Name = 'PRCPCum',
!  TimeAverage = .true.
!/
!&gtool_historyauto_nml
!  Name = 'PRCPLsc',
!  TimeAverage = .true.
!/
&gtool_historyauto_nml
  Name = 'Evap, Sens, OLR, SLR, OSR, SSR, ISR'
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'EvapB, SensA, OLRA, SLRA, OSRA, SSRA, ISRA'
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'SurfAlbedo'
/
&gtool_historyauto_nml
  Name = 'SeaIceConc'
/
&gtool_historyauto_nml
  Name = 'Mass, KinEngy, IntEngy, PotEngy, LatEngy, TotEngy, Enstro'
  SpaceAverage = .true., .true., .true.,
  Precision = 'double',
/
!!$&gtool_historyauto_nml
!!$  Name = 'RainCumulus, RainLsc',
!!$  TimeAverage = .true.
!!$/
!!$&gtool_historyauto_nml
!!$  Name = 'DTempDtCumulus, DQVapDtCumulus, DTempDtLsc, DQVapDtLsc'
!!$/
!!$&gtool_historyauto_nml
!!$  Name = 'DTempDtDryConv'
!&gtool_historyauto_nml
!  Name = 'QO3, QCO2'
!/
&gtool_historyauto_nml
  Name = 'Decl'
/
&gtool_historyauto_nml
  Name = 'DistFromStarScld'
/
&gtool_historyauto_nml
  Name = 'PlanetLonFromVE'
/
&gtool_historyauto_nml
  Name = 'SurfH2OVapFlux, SurfH2OVapFluxB'
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'SurfH2OVapFluxU, EvapU'
  TimeAverage = .true.
/
!&gtool_historyauto_nml
!  Name = 'TKE, VelDiffCoef, TempDiffCoef, TKEPShear, TKEPBuoy, TKEDiss'
!/
!&gtool_historyauto_nml
!  Name = 'TKE'
!/
!&gtool_historyauto_nml
!  Name = 'OMG'
!/
!&gtool_historyauto_nml
!  Name = 'DTempDtRadS, DTempDtRadL'
!/
!&gtool_historyauto_nml
!  Name = 'PotTemp, SLP'
!/
!&gtool_historyauto_nml
!  Name = 'RadLUWFLXA, RadLDWFLXA, RadSUWFLXA, RadSDWFLXA'
!  TimeAverage = .true.
!/